How to make an Automatic Door

Tutorial on how to make automatic doors.

For this tutorial you will need:

PHX 3 ( to get a nice door )
Wire mod
Stacker

1# Spawn one 1x2 plate and use stacker to get 4 in a raw like the picture below shows.



2# No collide the two on the left to each other and other once to each other ( This is for they will go in to each other later )
3# Use slider as the red dots shows on the picture below.



4# Now we will need Hydraulic ( Wire ), Use the Hydraulic on the same way the picture show you.
( Place the controller were ever you want, i spawn a new plate and put the on it.)



5# For this step you will need:
- Target Finder ( "Target Player" , "mini range 1" , "max range 1000" , Put it somewere on the same plate you got the hydraulic on)
- Beacon Sensor ( "Output: Distance" ONLY, I recommend to place it center on the plate you got the Hydraulic on. )
- We will also need: 1 "Multiply Chip", 1 "Greater Than" and last "Constant Value" with the first value " 48 " and the second " 200 "
( 48 is how long the doors will go and 200 is the range for the doors to open. )



6# Time to wire everything together.

First we will wire Beacon Sensor to Target Finder by using the Beacon Sensor tool. Right click on the Beacon Sensor then on the Target Finder
And they will be wired together.

Now we will change to the Wire Tool.

Both Hydraulic to Multiply chip Then "Multi Chip ( A )" To "Greater Than" , "Multi Chip ( B )" to "Constant Value ( 48 ) "
Now we are allmost done, Just wire "Greater Than ( A )" to "Beacon Sensor", "Greater Than ( B )" to "Constant Value ( 200 )"

Now your done, Unfreeze The two midle plates and if you get in a range of 200 or less ( to the beacon sensor ) the doors will open.






Made By Prosch

Lol nicely done xD. But this is still quite easy but if there comes more .. keep up the good work :p

Yes i will make more tutorials

ill guess im gonna make some expression2 tuts ^^. but atm there is TO MUCH HOMEWORK ! and some stupid projects...

Im to smart for homeworks soo im not get any

But yea you should make some E2 tuts, my next tutorial i will propably make a BASIC tutorial on how to make a hologram and stuff ^^